Skatepark Layouts Must Have

If you are passionate about skateboarding like us, surely at some point you will have fantasized about building your ideal skatepark Designs. In this case we let our imagination run wild and let ourselves be guided by what we want, ramps, quarters, pyramids and much more. We thought about all of this without looking too much into the physics behind every skatepark build.

The design and development of a good skatepark is a job that takes a long time to analyze. It is not as easy as putting this here and the other there, it is knowing if the skater can really ride that track optimally. Each skatepark must have its precise elements, and if you want to know what these are, we invite you to keep reading.

What makes up a good skatepark?

The construction of a skatepark is not the work of small children as we have been anticipating. Every detail must be thought to the millimeter, both for the safety of the skater and for its performance. You must think about both the elements that will compose it and the materials of it, let's see one by one.

Construction material

This is the great debate of many skaters and skatepark designers What material is the best for the construction of a skatepark? It is a question that can change the answer depending on taste and budget.

Metal

An option that we shouldn't trust very muchis metal, a material that a priori seems resistant and cheap. But, we must know that over time it will end up greatly harming the skater who practices on it.

Cement

A material that is very fond of the community, and the most common one could say; cement. This iconic building material boasts extreme durability and somewhat high construction costs. In addition to that, it is the one that involves the most work in any rule, it is one of the most difficult to use.

The good thing about cement is that it practically does not require any maintenance, only basic and that after a long time. This material stands out for surviving almost any weather condition that comes our way, but it has its disadvantages like all materials.

The first thing that we can highlight is that you cannot make variants in the design once it is done. It does not absorb impacts well and can be difficult to reform in the extension of the land, these points are those that disadvantage the cement. Despite all this; It is a very good option for building a skatepark.

Wood

And finally we have wood, the material with the greatest flexibility in terms of making skateparks out of it. It has many advantages, such as the fact that mobile modules can be manufactured and that they can be varied over time. It is a cheap material to obtain and without as much complication as cement.

It absorbs falls very well and this allows the skater a safer experience, which will give him the confidence to develop his maximum potential. It is used both indoors and outdoors, it is also used on tours and routes of mobile skateparks.

Maintenance is a delicate thing, you must have the appropriate implements and materials. The weather conditions it resists are inferior to that of cement, in exchange for many other benefits.

Physical design of the skatepark

In the introduction we talked a bit about the complex physical work that can take calculating the placement and distribution of modules in a skatepark. This calculation must take into account the speed that the subject can reach, the required distance, height, separation between ramps and many other factors that help maximize the accumulated kinetic energy. In short, stages of movement that should be taken advantage of, such as the impulse and the straight line.

Modules and elements

This is what interests us most when it comes to making a skatepark, where we can have fun and jump like skate gods. But, each element has its usefulness and advice that you must follow so that its placement in the skatepark is not lost. Let's see the main modules and elements.

Skatepark Halfpipe Designs

The composition of this module is basic, two ramps joined by a transition that form a U. It is one of the most used in any skatepark in the world, two ramps separated by a set distance, whose path must be straight and flat. This will allow the skater to roll and gain balance before taking on the ramp.

Piperamp Skatepark Designs

This element is for the most extreme skateparks, it could be seen as an impossible challenge for less experienced people, but; it is a total satisfaction to achieve the complete route. It is about that, a ramp that forms a complete circle, something like a double halfpipe.

FunBox Skatepark Designs

This is another of the basic modules that we find in any skatepark. It is a box with several ramps and a flat surface. A large number of tricks can be developed in this one and it works very well as a complement to any composition. Elements such as rails can be added to the Funbox design

Skatepark Ramps Designs

Classic in every skatepark, a ramp that will allow us to gain speed, make small jumps or grind. It is essential in any track that we build, without ramps the skatepark could be considered dead.

Skatepark Bowl Designs

Another of the elements that all skaters love, the bowls, are bowl-shaped structures that allow us to go through it without restriction. It allows you to perform light jumps when reaching enough speed to walk on its walls, pick up speed and much more. They are quite versatile and can be an excellent addition to any skatepark.

Clearly there are many other modules and elements that you can add to your skatepark, but; we are giving you the highlights. A composition that integrates these elements well can be the winning combination and guarantee good performance and fun. Remember that creativity should be allowed to fly, without neglecting physics; Of course.

With all this in mind What are you waiting for to design and build your own skatepark? Come on.